The standard height of kitchen worktop is 910mm, however, this isn’t a hard and fast rule. It’s important to keep in mind that the final decision on the height of your worktop is entirely up to you. When purchasing a new kitchen countertop, comfort and accessibility are just as important as the cost, style, and colour. However, you may utilise a standard height of kitchen worktop as a reference when making this decision. I’ll explain what is the standard height of kitchen worktop, why it exists, and why it matters so much in this post.
What is the standard height of kitchen worktop?
The standard height of a kitchen worktop is 910mm, measured from the floor to the top of the worktop.
The kitchen worktop height compose of the following dimensions:
- 150 millimetres of the plinth (kickboard)
- A base cabinet with a 720 mm depth
- Worktops with a 40mm thickness
- Size in mm: 910
Modern kitchens are increasingly using 20mm countertops, which means that the worktop height is 890mm. The height of your kitchen counters will also differ based on the kind of kitchen cabinet you choose and the design of your kitchen. A more modern kitchen may have a lower plinth and higher cabinets than a standard-sized kitchen.
Why is the height of your kitchen countertop important?
In a nutshell, this is for your benefit and convenience. A countertop that is too short forces you to bend awkwardly over it, which is terrible for your posture in the short term and may lead to severe back or shoulder problems in the long run. Similarly, a countertop that is too tall might make it difficult to prepare food — for example, you may not be able to obtain a good angle while chopping down on a piece of meat or another item, which can result in short-term wrist discomfort in the best of conditions.
For this reason, the standard height of kitchen worktop is 910mm, which is near enough for the typical person to comfortably use. A tall or short person may wish to consider how to modify their kitchen to make it more comfortable for them. It may be costly and time-consuming in the short term, but believe us when we say it’s well worth it in the long run!
What is the standard height of kitchen worktop?
That is all dependent on you! The height of your kitchen worktops will vary based on the kind of kitchen cabinets you have, as well as the thickness of the countertop you pick. You can tell whether your kitchen countertop is a good fit for you by looking at how your wrists line up with the edge of the worktop when you stand with your hands to the side. This guarantees that you have an adequate height above it to be comfortable, but not so much that you have to lean awkwardly down. You may have to make a compromise when purchasing a new laminate countertop if there are significant height differences within your family.
What is the average kitchen countertop depth?
The usual kitchen worktop depth ranges from 600 to 650mm. The depth will vary according to the depth of the base cabinets and the amount of overhang the worktop will have at the front of the cabinet. Typically, cabinet fronts have a worktop overhang of 20-30 mm. Some contemporary kitchen designs may feature an overhang of between 5 and 10 millimetres, providing a clean, uncluttered appearance.
It might be advantageous to have a somewhat deeper work surface. The optimal depth is around 650mm, since this provides additional prep area and strikes a good balance between wall cabinet space and access to plugs and sockets. This may be accomplished by creating a void behind the base cabinets by pulling them away from the wall slightly. This may be used for any kind of piping.
What is the thickness of a kitchen countertop?
Many kitchen worktop materials are available, and each comes in a variety of thicknesses. This is how you may customise the height of your kitchen countertop to meet your specific requirements by selecting the right material and thickness.
What is the typical dining table height?
An average dining table worktop is 760 millimetres in height. A counter-height dining table is a common feature in modern kitchens. A kitchen island is a great place to put one of them since it makes a great dining area.
The height of your kitchen table will be different from the height of your counters. As a result, you’ll need to make a worktop piece that lowers down from the rest of your kitchen run, preferably to 760mm in height. You can then place regular dining room chairs underneath this part to create an in-kitchen eating area suitable for the whole family.
What is the appropriate worksurface height for bar stools?
Barstool seating in the kitchen is becoming more and more popular. As a result, the kitchen becomes a more pleasant place to gather with friends and family. Barstool seating is simpler to accommodate than table height seating since your countertop height is appropriate for this form of dining. There are many methods to construct a bar stool seating area in the kitchen utilising worktops of varying heights.
Create an overhanging area for stools to sit on, and you’ll have a workstation that is the same height as your current work surface. There are several ways you may elevate your breakfast bar area, such as placing it on supports. If your worktops are above 910 mm high, you’ll want to couple them with chairs that are at least 740mm high or as high as 820mm high.
Conclusion
When it comes to kitchen work surfaces, there isn’t a fixed height. However, there is a typically recommended height range. And it’s a common range for a good reason since it caters to and works as a decent average for the majority of the people. However, elements such as the plinth, cabinet, and worktop design may be used to vary the height of your kitchen surface. Compromise is key to achieving the ideal kitchen for your family.
